Error
  • JUser: :_load: Unable to load user with ID: 558

Cisco Associate Certifications

  Cisco Associate Certifications

cisco pyramid associate

 

Computek is one of the largest and first Cisco Training centers in egypt with 20 years of experience delivering Cisco training and cisco certifications in all Cisco technologies.
All Cisco Training in Computek are held in Cisco Laps designed and equipped with cisco routers and cisco switches by Certified Cisco Systems Instructor CCSI with over than 8 years’ experience in the technical and training field.

 

Cisco Certified Design Associate CCDA

Cisco Certified Design Associate (CCDA)

cisco ccda

Cisco Certified Design Associate (CCDA) is for network design engineers, technicians, and support engineers, who enable efficient network environments with an understanding of network design fundamentals. A CCDA certified network professional demonstrates the skills required to design basic campus, data center, security, voice, and wireless networks.
 
Computek is one of the largest and first Cisco Training centers in egypt with 20 years of experience delivering Cisco training and cisco certifications in all Cisco technologies.
All Cisco Training in Computek are held in Cisco Laps designed and equipped with cisco routers and cisco switches by Certified Cisco Systems Instructor CCSI with over than 8 years’ experience in the technical and training field.

 


Exam

Course Name

Hours

640-864 DESGN

Designing for Cisco Internetwork Solutions (DESGN)

40

 

Designing for Cisco Internetwork Solutions (DESGN) 2.1

 

Prerequisites

 

It is strongly recommended that learners have the following skills before attending the DESGN course:

    Cisco CCNA level knowledge
    Practical experience deploying and operating networks built with Cisco network devices and Cisco IOS software
    CCNP level knowledge of Cisco switching, as found in the Cisco SWITCH (or BCMSN) courses
 
 Course Content
 
This course focuses on the foundational skills and knowledge necessary for professionals entering the specialization of network design or working as an apprentice to a more experienced network design engineer. Topics include design of routed and switched network infrastructures and services involving LAN, WAN, and broadband access for businesses and organizations, including service virtualization. The Enterprise Composite Model used in the course facilitates the design, planning, implementation, operation and optimization (PDIOO) through modular design and focus on the relations between modules.
 
 Course Objectives
 
Upon completing this course, the learner will be able to meet these overall objectives:
 
    Discuss methodology in network design.
    Describe how to structure and modularize the network design using the Cisco Enterprise Architecture Design the Enterprise Campus and Enterprise Data Center modules.
   Design the Remote Connectivity modules as needed.
    Design a network addressing plan and select a suitable routing protocol for a given network design.
    Evaluate security solutions for the network.
    Discuss the design implications of voice transport across the network.
    Discuss the design implications of wireless networking.
 
Course Outline
 
   Course Introduction
    Module 1: Applying a Methodology to Network Design
    Module 2: Structuring and Modularizing the Network
    Module 3: Designing Basic Campus and Data Center Networks
    Module 4: Designing Remote Connectivity
    Module 5: Designing IP Addressing and Selecting Routing Protocols
    Module 6: Evaluating Security Solutions for the Network
    Module 7: Identifying Voice Networking Considerations
    Module 8: Identifying Wireless Networking Considerations
    Module 9: Implementing and Operating the Network Design
 
 Who Should Attend
 
   Channel Partner / Reseller
   Customer
    Employee
 

sat-guaranteed

We are committed to providing our customers with the

best service and products available

100% satisfaction guarantee

why students prefer computek as the best training center in egypt new

1.Computek Training Center has trained over 1,000,000 trainees in Egypt and over 100,000 trainees in Middle East and africa.

2.Our programs are designed to meet our clients' training necessities including budget and time limitation.

3.We will cooperate with you to bring out effective programs fitting your organization.

4.Computek Training Center provides customer-focus training in mutable deliverymethods offering top quality training and high qualified instructor to meet individual learning styles and organization profession training.

5.Computek instructors are selected from the best of training professional instructors in Egypt who awarded the trust worthy certified international companies, Computek instructors not only provide superior education but also reliable work experience in the field of giving courses

6.Trainees prefer Computek Training Center not only due to our high quality training but also for our reasonable and cost-effective price list.

7.Computek Classroom is designed with cutting edge facilities strong from hardware and software technologies to the most sophisticated educational aids.

8.The information desk with our friendly and professional customers support representative is highly qualified to answer any questions and also deliver your unique requirements.

9.Computek Training Center staff is available 7 days in week from 10:00 AM to 10:00 PM to deal with any inquiries and assist student with anything they need.

10.Computek Training Center is partner of world's technology leads such as Microsoft, Cisco, Compatia, EC Council ,Adobe , Autodesk, prometric and Pearson VUE.

 

CCNA Routing and Switching 3.0

  Cisco Certified Network Associate (CCNA) Routing and Switching 3.0

CISCO CCNA

 The CCNA Routing and Switching validates the ability to install, configure, operate, and troubleshoot medium-size routed and switched networks.
 
Computek is one of the largest and first Cisco Training centers in egypt with 20 years of experience delivering Cisco training and cisco certifications in all Cisco technologies.
All Cisco Training in Computek are held in Cisco Laps designed and equipped with cisco routers and cisco switches by Certified Cisco Systems Instructor CCSI with over than 8 years’ experience in the technical and training field.

 

Exam

Course Name

Hours

200-125 CCNA

Interconnecting Cisco Networking Devices Part 1 (ICND1) 3.0 

 

92 Hours

Interconnecting Cisco Networking Devices Part 2 (ICND2) 3.0

 

 

Interconnecting Cisco Networking Devices, Part 1 (ICND1) 3.0

Prerequisites

 Before taking the ICND1 course, learners should be familiar with:

Basic computer literacy Basic Internet usage skills
Basic PC operating system navigation skills
Basic IP address knowledge

 

Course Content

 

 

This course will enable students to understand QoS, virtualization and cloud services, and network programmability related to WAN, access and core segments. It will provide the foundational understanding of network layers 1-3 that are applicable to core routing and switching plus other advanced technologies. Several topics have been added including; understanding the interactions and network functions of firewalls, wireless controllers and access points, along with additional focus on IPv6 and basic network security. The configuration commands are introduced through examples and supported with lab exercises. A full suite of labs have been developed using the virtual IOS environment with flexible topologies that reinforce concepts with hands-on, guided discovery and challenge labs that align to each lesson module. Upon completing this course, you will be able to meet these objectives:
 
Describe network fundamentals and build simple LANs
Establish Internet connectivity
Manage network device security
Expand small to medium sized networks with WAN connectivity
Describe IPv6 basics



Course Outline

 

 

Module 1: Building a Simple Network
Module 2: Establishing Internet Connectivity
Module 3: Summary Challenge
Module 4: Building a Medium-Sized Network
Module 5: Network Device Management and Security
Module 6: Summary Challenge
Module 7: Introducing IPv6

 

 

Who Should Attend

 

   Channel Partner / Reseller

   Customer

   Employee

 

Back to top

 

Interconnecting Cisco Networking Devices, Part 2 (ICND2) 3.0

Prerequisites

 

Before taking the ICND2 course, learners should be familiar with:
Understanding network fundamentals
Implementing local area networks
Implementing Internet connectivity
Managing network devices
Securing network devices
Implementing basic IPv6 connectivity

 

Course Content

 

This course will students with the knowledge and skills needed to install, configure, operate, and troubleshoot a small enterprise network. It will ensure that students understand and are ready to deploy the latest shifts in technologies and solutions as follows:
understanding of Quality of Service (QoS) elements and their applicability           
how virtualized and cloud services will interact and impact enterprise networks
an overview of network programmability and the related controller types and tools that are available to support software defined network architectures A full suite of labs have been developed using the virtual IOS environment with flexible topologies that reinforce concepts with hands-on, guided discovery and challenge labs that align to each lesson module. Upon completing this course, you will be able to meet these objectives:
 
Operate a medium-sized LAN with multiple switches supporting VLANs, trunking, switch stacking, chassis aggregation and spanning tree protocols
Troubleshoot IP connectivity
Configure and troubleshoot EIGRP and OSPF in IPv4 and IPv6 environments
Define characteristics, functions and components of a WAN
Describe SNMP, Syslog, and manage Cisco device configurations, IOS images and licenses
Understand QoS, virtualization and cloud services, and network programmability related to WAN, access and core segments.

 

 Course Outline

 

Module 1: Implement Scalable Medium-Sized Networks
Module 2: Troubleshooting Basic Connectivity
Module 3: Implementing an EIGRP-Based Solution
Module 4: Summary Challenge
Module 5: Implement a Scalable OSPF-Based Solution
Module 6: Wide-Area Networks
Module 7: Network Device Management and Security
Module 8: Summary Challenge

 

  Who Should Attend

Channel Partner / Reseller
Customer
Employee
 
 

 

need best quotation for a training course in egypt call

sat-guaranteed

We are committed to providing our customers with the

best service and products available

100% satisfaction guarantee

why students prefer computek as the best training center in egypt new

1.Computek Training Center has trained over 1,000,000 trainees in Egypt and over 100,000 trainees in Middle East and africa.

2.Our programs are designed to meet our clients' training necessities including budget and time limitation.

3.We will cooperate with you to bring out effective programs fitting your organization.

4.Computek Training Center provides customer-focus training in mutable deliverymethods offering top quality training and high qualified instructor to meet individual learning styles and organization profession training.

5.Computek instructors are selected from the best of training professional instructors in Egypt who awarded the trust worthy certified international companies, Computek instructors not only provide superior education but also reliable work experience in the field of giving courses

6.Trainees prefer Computek Training Center not only due to our high quality training but also for our reasonable and cost-effective price list.

7.Computek Classroom is designed with cutting edge facilities strong from hardware and software technologies to the most sophisticated educational aids.

8.The information desk with our friendly and professional customers support representative is highly qualified to answer any questions and also deliver your unique requirements.

9.Computek Training Center staff is available 7 days in week from 10:00 AM to 10:00 PM to deal with any inquiries and assist student with anything they need.

10.Computek Training Center is partner of world's technology leads such as Microsoft, Cisco, Compatia, EC Council ,Adobe , Autodesk, prometric and Pearson VUE.

 

 

CCNA Security

 CCNA Security Certification

cisco CCNA Security Certification

Cisco Certified Network Associate Security (CCNA Security) validates associate-level knowledge and skills required to secure Cisco networks. With a CCNA Security certification, a network professional demonstrates the skills required to develop a security infrastructure, recognize threats and vulnerabilities to networks, and mitigate security threats. The CCNA Security curriculum emphasizes core security technologies, the installation, troubleshooting and monitoring of network devices to maintain integrity, confidentiality and availability of data and devices, and competency in the technologies that Cisco uses in its security structure.
 
Computek is one of the largest and first Cisco Training centers in egypt with 20 years of experience delivering Cisco training and cisco certifications in all Cisco technologies.
All Cisco Training in Computek are held in Cisco Laps designed and equipped with cisco routers and cisco switches by Certified Cisco Systems Instructor CCSI with over than 8 years’ experience in the technical and training field.

 

 

Exam

Course Name

Hours

210-260 IINS

Implementing Cisco IOS Network Security (IINS)

40

 Implementing Cisco IOS Network Security (IINS) V3

 
Prerequisites
 
Skills and knowledge equivalent to those learned in Interconnecting Cisco Networking Devices Part 1 (ICND1)
Working knowledge of the Windows operating system
Working knowledge of Cisco IOS networking and concepts
 
Course Content
 
Implementing Cisco Network Security (IINS) v3.0 is a 5-day instructor-led course presented by Cisco Learning Partners to end users and channel partner customers. The course focuses on security principles and technologies, using Cisco security products to provide hands-on examples. Using instructor-led discussions, extensive hands-on lab exercises, and supplemental materials, this course allows learners to understand common security concepts, and deploy basic security techniques utilizing a variety of popular security appliances within a “real-life” network infrastructure.  
 
Course Objectives
 
 Upon completing this course, the learner will be able to meet these overall objectives
Describe common network security concepts
Secure routing and switching infrastructure
Deploy basic authentication, authorization and accounting services
Deploy basic firewalling services
Deploy basic site-to-site and remote access VPN services
Describe the use of more advanced security services such as intrusion protection, content security and identity management
 
Course Outline
 
Course Introduction
Network Security Concepts
Secure Network Devices
Firewalls
Virtual Private Networks
Advanced Topics
 
Who Should Attend

Channel Partner / Reseller
Customer
   Employee
 
 
 
 
 
 
need best quotation for a training course in egypt call

sat-guaranteed

We are committed to providing our customers with the

best service and products available

100% satisfaction guarantee

 why students prefer computek as the best training center in egypt new

1.Computek Training Center has trained over 1,000,000 trainees in Egypt and over 100,000 trainees in Middle East and africa.

2.Our programs are designed to meet our clients' training necessities including budget and time limitation.

3.We will cooperate with you to bring out effective programs fitting your organization.

4.Computek Training Center provides customer-focus training in mutable deliverymethods offering top quality training and high qualified instructor to meet individual learning styles and organization profession training.

5.Computek instructors are selected from the best of training professional instructors in Egypt who awarded the trust worthy certified international companies, Computek instructors not only provide superior education but also reliable work experience in the field of giving courses

6.Trainees prefer Computek Training Center not only due to our high quality training but also for our reasonable and cost-effective price list.

7.Computek Classroom is designed with cutting edge facilities strong from hardware and software technologies to the most sophisticated educational aids.

8.The information desk with our friendly and professional customers support representative is highly qualified to answer any questions and also deliver your unique requirements.

9.Computek Training Center staff is available 7 days in week from 10:00 AM to 10:00 PM to deal with any inquiries and assist student with anything they need.

10.Computek Training Center is partner of world's technology leads such as Microsoft, Cisco, Compatia, EC Council ,Adobe , Autodesk, prometric and Pearson VUE.

 

 

CCNA Service Provider

 Cisco Certified Network Associate Service Provider (CCNA SP)

CISCO CCNA Service Provider

Cisco Certified Network Associate Service Provider (CCNA SP) certification is for service provider network engineers, technicians and designers who focus on the latest in Service Provider industry core networking technologies and trends. With the ability to configure, implement, and troubleshoot baseline Cisco Service Provider Next-Generation networks, CCNA SP certified individuals deploy, maintain and improve carrier-grade network infrastructures.

Computek is one of the largest and first Cisco Training centers in egypt with 20 years of experience delivering Cisco training and cisco certifications in all Cisco technologies.
All Cisco Training in Computek are held in Cisco Laps designed and equipped with cisco routers and cisco switches by Certified Cisco Systems Instructor CCSI with over than 8 years’ experience in the technical and training field.

 

Exam

Course Name

Hours

640-875 SPNGN1

Building Cisco Service Provider Next-Generation Networks, Part 1 (SPNGN1)

40

640-878 SPNGN2

Building Cisco Service Provider Next-Generation Networks, Part 2 (SPNGN2)

40

 
 
Prerequisites
None
 
Course Content
 
The Building Cisco Service Provider Next-Generation Networks, Part 1 course is associated with the CCNA Service Provider certification. The course is a 5-day Instructor Lead Training course that provides network engineers and technicians with the basic knowledge and skills necessary to support a service provider network. The course provides knowledge of the major components of a network and helps learners to understand how service provider networks function. The course introduces IP Next-Generation Network (IP NGN) architecture that helps service providers to build modern, scalable and reliable networks. The course also includes classroom activities with remote labs that are useful to gain practical skills for deploying basic Cisco IOS / IOS XE and Cisco IOS XR software features to operate and support service provider networks.
 
Course Objectives
 
Upon completing the SPNGN1 course, the learner will be able to meet these overall objectives:
   Describe the purpose and function of IP and data network devices
   Describe QoS, MPLS, multicast, high availability, and VPN technologies
   Describe and differentiate IPv4 and IPv6 addressing schemes
   Describe and configure switched and routed network technologies
   Configure IP services like NAT and DHCP
   Configure Cisco IOS, IOS XE, and IOS XR software on Cisco platforms
   Configure transport, access, and edge technologies, as well as security in the network
   Configure network management protocols like Netflow, SNMP, and CDP on Cisco platforms
 
Course Outline
 
Module 1, IP Fundamentals, contains 6 lessons, a lab, and case study:
 
   Lesson 1: Defining Functions of Networking
   Lesson 2: Introducing TCP / IP Layers and the OSI Reference Model
   Lesson 3: Describing TCP / IP Network Layer
   Lesson 4: Describing TCP / IP Transport Layer
   Lesson 5: Explaining Network Security
   Lesson 6: IP Addressing and Subnets
   Lab 1-1: Verify Host IP Configuration
   Case Study 1-2: Configure Subnetting
 
Module 2, Basic LAN Switching, contains 7 lessons and a lab:
 
   Lesson 1: Understanding Ethernet
   Lesson 2: Connecting to an Ethernet LAN
   Lesson 3: Switched LAN Technology
   Lesson 4: Operating a Cisco Switch
   Lesson 5: Switch Security
   Lesson 6: Performing Switched Network Optimizations
   Lesson 7: Troubleshooting Switch Issues
   Lab 2-1: Configuring Cisco Switches
 
Module 3, Basic IP Routing, contains 5 lessons and a lab:
 
   Lesson 1: Exploring the Functions of Routing
   Lesson 2: Introduction to the Cisco IOS XR
   Lesson 3: Configuring Basic Routing
   Lesson 4: Configuring EIGRP
   Lab 3-1: Configure Basic Router Configuration
   Lesson 5: Understanding Cisco Router Security
 
Module 4, Connectivity Technologies, contains 5 lessons and 2 labs:
 
   Lesson 1: Access Technologies
   Lesson 2: Introducing Service Provider Access, Edge, and Transport Technologies
   Lesson 3: Enabling the WAN Internet Connection
   Lab 4-1: Implement Internet Connectivity
   Lesson 4: Introducing Encapsulation
   Lab 4-2: Configure Data Link Layer Encapsulation
   Lesson 5: Introducing VPN
 
Module 5: Network Management and Security
 
Who Should Attend
 
   Channel Partner / Reseller
   Customer
   Employee
 
 
 
Prerequisites
 
SPNGN1

Course Content
 
The Building Cisco Service Provider Next-Generation Networks, Part 2 course is associated with the CCNA Service Provider certification. The course is a 5-day Instructor Lead Training course that provides network engineers and technicians the knowledge and skills necessary to implement and support a service provider network. The course provides knowledge of the major components of a service provider network construction and the Cisco service provider IP NGN architecture. The course also includes classroom activities with remote labs that are useful to gain practical skills for deploying Cisco IOS / IOS XE and Cisco IOS XR software features to operate and support service provider networks..
 
Course Objectives
 
Upon completing the SPNGN2 course, the learner will be able to meet these overall objectives:
 
   Present a unified view of a service provider network in relation to Cisco IP NGN architecture
   Implement and verify VLANs and trunking. Configure HSRP, VRRP, and GLBP. Configure and verify OSPF and IS-IS, and describe MPLS LDP
   Describe the basics of link state routing protocols. Describe the operation and configuration of single area OSPF (including load balancing and authentication), IS-IS, common issues with IS-IS, and approach for troubleshooting problems
   Configure basic BGP to enable inter-domain routing in a service provider network
   Describe ACL and IP address translation
   Describe the fundamentals of Cisco IOS XR, and IOS XE software technology
 
Course Outline
 
Module 1, Service Provider Network Construction, contains 4 lessons:
 
   Lesson 1: Introducing General Service Provider Network Architecture
   Lesson 2: Placing Cisco Hardware Platforms
   Lesson 3: Interconnecting Service Providers
   Lesson 4: Exploring Cisco IP NGN Architecture, Services, and Component Functions
 
Module 2, Advanced LAN Switching, contains 4 lessons:
 
   Lesson 1: Implementing VLANs and Trunks
   Lesson 2: Implementing Spanning Tree
   Lesson 3: Configuring Routing Between VLANs
   Lesson 4: Introducing First Hop Redundancy Protocols
 
Module 3, Internal Service Provider Traffic Forwarding, contains 5 lessons:
 
   Lesson 1: Introducing Link State Routing Protocols
   Lesson 2: Implementing OSPF
   Lesson 3: Implementing IS-IS M
   Lesson 4: Introducing Route Redistribution M
   Lesson 5: Introducing MPLS Basics
 
Module 4, External Service Provider Routing, contains 5 lessons:
 
   Lesson 1: Introducing BGP
   Lesson 2: Understanding BGP Path Attributes
   Lesson 3: Establishing BGP Sessions
   Lesson 4: Processing BGP Routes
   Lesson 5: Configuring Basic BGP
 
Module 5, ACL and IP Address Translation, contains 3 lessons and a lab:
 
   Lesson 1: Applying Access Control Lists
   Lab 5-1: Implement ACLs
   Lesson 2: Implementing Advanced Address Translation
   Lesson 3: Transitioning to IPv6
 
Module 6, Cisco IOS XE and Cisco IOS XR Software, contains:
 
   Lesson 1: Describing Cisco IOS XR Software Architecture and Features
   Lesson 2: Explaining Software Maintenance Operations on Cisco IOS XR and Cisco IOS XE software
   Lesson 3: Explaining Configuration Management with Cisco IOS XR software
   Lesson 4: Installing Cisco IOS XR software from Scratch
 
Who Should Attend
 
   Channel Partner / Reseller
   Customer
   Employee
 
 

sat-guaranteed

We are committed to providing our customers with the

best service and products available

100% satisfaction guarantee

why students prefer computek as the best training center in egypt new

1.Computek Training Center has trained over 1,000,000 trainees in Egypt and over 100,000 trainees in Middle East and africa.

2.Our programs are designed to meet our clients' training necessities including budget and time limitation.

3.We will cooperate with you to bring out effective programs fitting your organization.

4.Computek Training Center provides customer-focus training in mutable deliverymethods offering top quality training and high qualified instructor to meet individual learning styles and organization profession training.

5.Computek instructors are selected from the best of training professional instructors in Egypt who awarded the trust worthy certified international companies, Computek instructors not only provide superior education but also reliable work experience in the field of giving courses

6.Trainees prefer Computek Training Center not only due to our high quality training but also for our reasonable and cost-effective price list.

7.Computek Classroom is designed with cutting edge facilities strong from hardware and software technologies to the most sophisticated educational aids.

8.The information desk with our friendly and professional customers support representative is highly qualified to answer any questions and also deliver your unique requirements.

9.Computek Training Center staff is available 7 days in week from 10:00 AM to 10:00 PM to deal with any inquiries and assist student with anything they need.

10.Computek Training Center is partner of world's technology leads such as Microsoft, Cisco, Compatia, EC Council ,Adobe , Autodesk, prometric and Pearson VUE.

 

 

CCNA Data Center

 CCNA Data Center

cisco ccna data center

For data center network administrators who want to save time and money on data center design, equipment installation, and maintenance, the Cisco Certified Network Associate Data Center (CCNA Data Center) certification is a job-role-focused training and certification program that allows you to maximize your investment in your education and increase the value of your data center network.

 

Computek is one of the largest and first Cisco Training centers in egypt with 20 years of experience delivering Cisco training and cisco certifications in all Cisco technologies.

 

All Cisco Training in Computek are held in Cisco Laps designed and equipped with cisco routers and cisco switches by Certified Cisco Systems Instructor CCSI with over than 8 years’ experience in the technical and training field.

 

 

Exam

Course Name

Hours

640-911

DCICN

Introducing Cisco Data Center Networking (DCICN)

40

640-916

DCICT

Introducing Cisco Data Center Technologies (DCICT)

40

 
 
Prerequisites
None Required
 
Course Content
 
Introducing Cisco Data Center Networking (DCICN) helps prepares the learner for a CCNA Data Center exam certification. It covers the Cisco Data Center networking components and technologies.
 
Course Objectives
 
Describe How a Network Works
Configure, Verify and Troubleshoot Data Center Switches
Implement a Data Center IP Addressing Scheme
Configure, verify, and troubleshoot Routing on Cisco Nexus Switches.
 
Course Outline
 
   Module 1: Building a Simple Network (7 lessons)
   Module 2: Implementing a Switched Network (6 lessons)
   Module 3: IP Addressing (4 lessons)
   Module 4: Routing on the Cisco Nexus Switch (4 lessons)
 
Who Should Attend
 
   Channel Partner / Reseller
   Customer
   Employee
 
 
 
Prerequisites
 
Knowledge similar to that covered in Introducing Cisco Data Center Networking (DCICN)
 
Course Content
 
Introducing Cisco Data Center Technologies (DCICT) helps prepare the learner for a CCNA Data Center exam certification. It covers Data Center Cisco technologies, including Unified Computing / virtualization and Unified Fabric (Nexus product family and Storage Networking). Interworking with Catalyst 6500 and non-Cisco products for the virtualization of the computing environment will also be covered. The course reflects the need to onboard a variety of learners who may be specialized in some of the Data Center technologies, but who need to be able to perform in a broader role.
 
Course Objectives
 
Upon completing this course, the learner will be able to meet these overall objectives:
   Describe and Verify Cisco Data Center Fundamentals
   Describe and Verify Cisco Data Virtualization
   Describe and Verify Cisco Data Center Storage Networking
   Describe and Verify Cisco Data Center Unified Fabric
   Describe and Verify Cisco Unified Computing System .
 
Course Outline
 
   Module 1: Cisco Data Center Fundamentals Concepts (11 lessons)
   Module 2: Data Center Unified Fabric (5 lessons)
   Module 3: Storage Networking (8 lessons)
   Module 4: DC Virtualization (4 lessons)
   Module 5: Unified Computing (7 lessons)
 
Who Should Attend
 
   Channel Partner / Reseller
   Customer
   Employee
 
 
 

sat-guaranteed

We are committed to providing our customers with the

best service and products available

100% satisfaction guarantee


why students prefer computek as the best training center in egypt new

1.Computek Training Center has trained over 1,000,000 trainees in Egypt and over 100,000 trainees in Middle East and africa.

2.Our programs are designed to meet our clients' training necessities including budget and time limitation.

3.We will cooperate with you to bring out effective programs fitting your organization.

4.Computek Training Center provides customer-focus training in mutable deliverymethods offering top quality training and high qualified instructor to meet individual learning styles and organization profession training.

5.Computek instructors are selected from the best of training professional instructors in Egypt who awarded the trust worthy certified international companies, Computek instructors not only provide superior education but also reliable work experience in the field of giving courses

6.Trainees prefer Computek Training Center not only due to our high quality training but also for our reasonable and cost-effective price list.

7.Computek Classroom is designed with cutting edge facilities strong from hardware and software technologies to the most sophisticated educational aids.

8.The information desk with our friendly and professional customers support representative is highly qualified to answer any questions and also deliver your unique requirements.

9.Computek Training Center staff is available 7 days in week from 10:00 AM to 10:00 PM to deal with any inquiries and assist student with anything they need.

10.Computek Training Center is partner of world's technology leads such as Microsoft, Cisco, Compatia, EC Council ,Adobe , Autodesk, prometric and Pearson VUE.

 

 

CCNA Video

  Cisco Certified Network Associate Video (CCNA Video)

cisco ccna video 2014

Audiovisual professionals working with traditional analog solutions, can extend their skills into a Video-over-IP networked video environment with our Cisco Certified Network Associate Video (CCNA Video) certification. This certification track is a job-role-focused training and certification program for video and collaboration products. You will learn to deploy video end-points, set-up new users, and operate networked video solutions.

Voice and networking professionals with CCNA Voice certification can also benefit from this training and extend their career into video networking.

 

Computek is one of the largest and first Cisco Training centers in egypt with 20 years of experience delivering Cisco training and cisco certifications in all Cisco technologies.

 

All Cisco Training in Computek are held in Cisco Laps designed and equipped with cisco routers and cisco switches by Certified Cisco Systems Instructor CCSI with over than 8 years’ experience in the technical and training field.

 

 

Exam

Course Name

Hours

200-001 VIVND

Implementing Cisco Video Network Devices, Part 1 (VIVND1)

 

40

Implementing Cisco Video Network Devices, Part 2 (VIVND2)

40

640-461 ICOMM

Introducing Cisco Voice and Unified Communications Administration (ICOMM)

40

 
 
Implementing Cisco Video Network Devices, Part 1 (VIVND1) v1.0 course is a learning product designed to provide students with the necessary knowledge to describe characteristics of video solutions and assess the requirements for a successful implementation of a video solution. The course describes the characteristics of a video solution and enables students to evaluate the general requirements for video deployments such as coding options, media formats, protocols, network impact, high-level architectural components and their interactions, and requisites to the environment
.
Prerequisites:
 
It is recommended that the learner has foundational IP networking knowledge such as included with a CCENT or CCNA certification.
Modules and Content:
Module 1: Video Conferencing and Streaming Fundamentals
   Lesson 1: Introduction to Video and Video Applications
   Lesson 2: Video Technology Basics
   Lesson 3: Video Protocols and Media
   Lesson 4: Functional Components of Video Infrastructures
   Lesson 5: Network Requirements of Video Solutions
   Lesson 6: Cisco Video Solution Architecture Overview
Module 2: Cisco TelePresence Endpoint Environmental Requirements and Installation
   Lesson 1: Environmental Requirements for Video Installations
   Lesson 2: Installing Cisco TelePresence Endpoints and Profile Systems
 
Target Audience:
 
The target audiences for this training are: channel partners and end-users.
Implementing Cisco Video Network Devices Part 2 (VIVND2) 1.0
Prerequisites
The knowledge and skills that a learner must have before attending this course are as follows:
   Working knowledge of basic IP basic networking.
   Knowledge of Video Foundation Topics listed in the Implementing Cisco Video Network Devices, Part 1 (VIVND1) v1.0.
   Cisco Basic IP networking e-learning or Interconnecting Cisco Devices Part 1 and Part 2 (ICND1 and ICND2 )

 

Course Content
 
Implementing Cisco Video Network Devices Part 2, (VIVND2) v1.0 is a new 5-day ILT class designed to provide students with the necessary knowledge and skills to implement various Cisco Video endpoints in converged Cisco video infrastructures. Cisco business video solutions has 4 major Cisco Medianet application components: - Unified Communication and Collaboration - TelePresence - Digital Media Suite (DMS) - Video Surveillance The Implementing Cisco Video Network Devices Part 2 (VIVND2) v1.0 course describes Cisco business video solutions and enables students to implement and troubleshoot Cisco Unified Communication and Collaboration, TelePresence and Digital Media Player in different Cisco business video solution architectures.
 
Course Objectives
 
Upon completing this course, the learner will be able to meet these overall objectives :
   Describe the components and architectures of Cisco business video solutions.
   Implement Cisco Unified Communications and Cisco Collaboration video endpoints.
   Implement Cisco TelePresence video endpoints.
   Implement multipoint conferencing on Cisco video endpoints.
 
Course Outline
Course Introduction - Cisco Business Video Solutions - Cisco Unified Communications and Collaboration Video Endpoints - Cisco TelePresence Endpoints - Multipoint Conferencing.
 
Module 1: Cisco Business Video Solutions
   Lesson 1: Describing Cisco Video Collaboration.
   Lesson 2: Describing Cisco Video and Content Delivery - Lab 1-1: Discovering the Endpoint Access Network Lesson 3: Describing Cisco Video Surveillance Lesson 4 and Lab 1-2: Discovering Central Video-Endpoint Control Elements
 
Module 2: Cisco Unified Communications and Collaboration Video Endpoints
   Lesson 1: Describing Characteristics and Installation
   Lesson 2 and Lab 2-1: Configuring Cisco Unified Communications and Cisco Collaboration Video Endpoints Lesson 3 and Lab 2-2: Operating and Troubleshooting Cisco Unified Communications Video Endpoints
 
Module 3: Cisco TelePresence Endpoints
   Lesson 1: Describing Cisco TelePresence Endpoint Characteristics and Installation
   Lesson 2 and Lab 3-1: Configuring and Implementing Cisco TelePresence CTS Software-Based Endpoints Lesson 3 and Lab 3-2: Configuring Cisco TelePresence TC and TE Software-Based Endpoints Lesson 4 and Lab 3-3:: Operating and Troubleshooting Cisco TelePresence Endpoints
 
Module 4: Multipoint Conferencing
   Lesson 1: Describing Cisco Multipoint Conferencing - Quiz 4-1: Cisco Multipoint Quiz (instructor asks students interactive questions to recapitulate Cisco multipoint video collaboration)
   Lesson 2: Configuring and Monitoring Cisco Multipoint Conferencing - Instructor Demonstration 4-1: Instructor demonstrates Cisco TMS, including scheduling, monitoring, trouble tickets, reports, phonebooks, user, endpoint management, and conference control - Lab 4-1: Implementing Multipoint Calls on Cisco Collaboration Endpoints
 
Who Should Attend
   Channel Partner / Reseller
   Customer
   Employee
 
 
 
Prerequisites
The knowledge and skills that a learner must have before attending this course are as follows:
   Working knowledge of converged voice and data networks
   Basic knowledge of Cisco IOS gateways
   Basic knowledge of Cisco Unified Communications Manager and Cisco Unity Connection
 
Course Content
Introducing Cisco Voice and Unified Communications Administration (ICOMM) v8.1 teaches learners how to maintain and operate a Cisco Unified Communications solution that is based on Cisco Unified Communications Manager, Cisco Unified Communications Manager Express, Cisco Unity Connection, and Cisco Unified Presence. This course provides the learners with the knowledge and skills to achieve associate-level competency in Cisco Unified Communications.
 
Course Objectives
   Describe the components of a Cisco Unified Communications solution and identify call signaling and media stream flow
   Provide an overview of administrator and end-user interface options in Cisco Unified Communications Manager, Cisco Unified Communications Manager Express, Cisco Unity Express, Cisco Unity Connection, and Cisco Unified Presence
   Understand call flows in Cisco Unified Communications Manager and Cisco Unified Communications Manager Express
   Perform endpoint and end-user administration tasks in Cisco Unified Communications Manager and Cisco Unified Communications Manager Express
   Describe the telephony features supported in Cisco Unified Communications Manager and Cisco Unified Communications Manager Express
   Administer users in Cisco Unity Connection and Cisco Unified Presence, and enable the most commonly used features for both applications
   Describe how to maintain a Cisco Unified Communications solution
 
Course Outline
 
This course introduces the architecture, components, functionalities, and features of Cisco Unified Communications solutions and describes how daily job tasks, such as system monitoring, moves, adds, and changes are performed on Cisco Unified Communications Manager, Cisco Unified Communications Manager Express, Cisco Unity Connection, and Cisco Unified Presence.
 
Who Should Attend
   Channel Partner / Reseller
   Customer
   Employee
 
 
 
 

sat-guaranteed

We are committed to providing our customers with the

best service and products available

100% satisfaction guarantee

 why students prefer computek as the best training center in egypt new

1.Computek Training Center has trained over 1,000,000 trainees in Egypt and over 100,000 trainees in Middle East and africa.

2.Our programs are designed to meet our clients' training necessities including budget and time limitation.

3.We will cooperate with you to bring out effective programs fitting your organization.

4.Computek Training Center provides customer-focus training in mutable deliverymethods offering top quality training and high qualified instructor to meet individual learning styles and organization profession training.

5.Computek instructors are selected from the best of training professional instructors in Egypt who awarded the trust worthy certified international companies, Computek instructors not only provide superior education but also reliable work experience in the field of giving courses

6.Trainees prefer Computek Training Center not only due to our high quality training but also for our reasonable and cost-effective price list.

7.Computek Classroom is designed with cutting edge facilities strong from hardware and software technologies to the most sophisticated educational aids.

8.The information desk with our friendly and professional customers support representative is highly qualified to answer any questions and also deliver your unique requirements.

9.Computek Training Center staff is available 7 days in week from 10:00 AM to 10:00 PM to deal with any inquiries and assist student with anything they need.

10.Computek Training Center is partner of world's technology leads such as Microsoft, Cisco, Compatia, EC Council ,Adobe , Autodesk, prometric and Pearson VUE.

 

 

 
 

CCNA Collaboration

Cisco Certified Network Associate Collaboration (CCNA Collaboration)
 
ccna collaboration  copy

For network video engineers, collaboration engineers, IP telephony and IP network engineers who want to develop and advance their collaboration and video skills in line with the convergence of voice, video, data and mobile applications, the Cisco CCNA Collaboration certification is a job-role focused training and certification program. It will allow you to maximize your investment in your education, and increase your professional value by giving you the skills to help your IT organization meet increased business demands resulting from these technology transitions.

 
Computek is one of the largest and first Cisco Training centers in egypt with 20 years of experience delivering Cisco training and cisco certifications in all Cisco technologies.
 
All Cisco Training in Computek are held in Cisco Laps designed and equipped with cisco routers and cisco switches by Certified Cisco Systems Instructor CCSI with over than 8 years’ experience in the technical and training field.
 
 

Implementing Cisco Collaboration Devices (CICD) 1  

Prerequisites
 
  • Working knowledge of converged voice and data networks
  • Basic knowledge of Cisco IOS gateways
  • Basic knowledge of Cisco Unified Communications Manager and Cisco Unity Connection.
 
Course Content
 
 
This course focuses on providing the skills and knowledge necessary to implement Cisco Unified Communications (UC) solutions. It covers administration of end-user interfaces, telephony and mobility features, and Cisco UC solutions maintenance. A new type of lab called a Discovery lab is introduced. Discovery labs are a learning environment, embedded in the lessons, that enables students to learn about principles and technology in a more interactive, hands-on way. The course also contains Challenge labs. Challenge labs are labs where students test their knowledge gained through a lesson or multiple lessons. After successful completion of this course, the student will be able to:
 
Describe the components of a Cisco Unified Communications solution and identify call signaling and media stream flows
 
Provide an overview of administrator and end-user interface options in Cisco Unified Communications Manager, Cisco Unified Communications Manager Express, Cisco Unity Connection, and Cisco Unified Communications Manager IM and Presence Service.
 
 
Understand call flows in Cisco Unified Communications Manager and Cisco Unified Communications Manager Express
 
Perform endpoint and end-user administration tasks in Cisco Unified Communications Manager and Cisco Unified Communications Manager Express
 
Describe the telephony features supported in Cisco Unified Communications Manager and Cisco Unified Communications Manager Express
 
Administer users in Cisco Unity Connection and Cisco Unified Communications Manager IM and Presence Service, and enable the most commonly used features for both applications
 
Describe how to maintain a Cisco Unified Communications solution
 
Course Outline
 
    • Module 1: Describe the Characteristics of a Cisco Unified Communications Solution
    • Module 2: Provision End Users and Associated Devices
    • Module 3: Configure Voice Messaging and Presence
    • Module 4: Maintain Cisco Unified Communications System
    • Module 5: Provide End User Support 
  •  

 

 

 
 
 
Implementing Cisco Video Network Devices, (CIVND1) Part 1
 
Prerequisites
 
It is recommended for the learner to have foundational IP networking knowledge such as that which is included as part of Cisco CCENT® or CCNA® certification. This Training assumes familiarity with the concepts included in the Interconnecting Cisco Networking Devices, Part 1 (ICND1) and with the basics from the Interconnecting Cisco Networking Devices, Part 2 (ICND2) training.
 
Course Content and Modules
 
Module 1: Video Conferencing and Streaming Fundamentals
Lesson 1: Introduction to Video and Video Applications
Lesson 2: Video Technology Basics
Lesson 3: Video Protocols and Media
Lesson 4: Functional Components of Video Infrastructures
Lesson 5: Network Requirements of Video Solutions
Lesson 6: Cisco Video Solution Architecture Overview
Module 2: Cisco TelePresence Endpoint Environmental Requirements and Installation
Lesson 1: Environmental Requirements for Video Installations
Lesson 2: Installing Cisco TelePresence Endpoints and Profile Systems
 

 Implementing Cisco Video Network Devices, Part 2 (CIVND2) 1.0

 
Prerequisites
Working knowledge of basic IP networking
Knowledge of video conferencing and streaming fundamentals
 
 
Course Content

 The Implementing Cisco Video Network Devices, Part 2 (CVIND2) course will provide students with the necessary knowledge and skills to implement various Cisco Collaboration endpoints in converged Cisco infrastructures. It covers a range of Cisco Collaboration solutions and enables students to implement and troubleshoot Cisco Unified Communication This course also introduces a new type of lab called a Discovery lab. Discovery labs are a learning environment, embedded in the lessons, that enables students to learn about principles and technology in a more interactive, hands-on way.

Course Outline

 

Module 1: Describe the components and architectures of Cisco Business Video solutions
 
Module 2: Implement Cisco Collaboration endpoints
 
Module 3: Implement Cisco TelePresence endpoints
 
Module 4: Implement multipoint conferencing on Cisco Collaboration endpoints
 
Module 5: Implement Cisco Digital Media Players
 
 
 
 

sat-guaranteed

We are committed to providing our customers with the

best service and products available

100% satisfaction guarantee

 

why students prefer computek as the best training center in egypt new

1.Computek Training Center has trained over 1,000,000 trainees in Egypt and over 100,000 trainees in Middle East and africa.

2.Our programs are designed to meet our clients' training necessities including budget and time limitation.

3.We will cooperate with you to bring out effective programs fitting your organization.

4.Computek Training Center provides customer-focus training in mutable deliverymethods offering top quality training and high qualified instructor to meet individual learning styles and organization profession training.

5.Computek instructors are selected from the best of training professional instructors in Egypt who awarded the trust worthy certified international companies, Computek instructors not only provide superior education but also reliable work experience in the field of giving courses

6.Trainees prefer Computek Training Center not only due to our high quality training but also for our reasonable and cost-effective price list.

7.Computek Classroom is designed with cutting edge facilities strong from hardware and software technologies to the most sophisticated educational aids.

8.The information desk with our friendly and professional customers support representative is highly qualified to answer any questions and also deliver your unique requirements.

9.Computek Training Center staff is available 7 days in week from 10:00 AM to 10:00 PM to deal with any inquiries and assist student with anything they need.

10.Computek Training Center is partner of world's technology leads such as Microsoft, Cisco, Compatia, EC Council ,Adobe , Autodesk, prometric and Pearson VUE.

 

CCNA Wireless

cisco CCNA Wireless

Cisco Certified Network Associate Wireless (CCNA Wireless) validates associate-level knowledge and skills to configure, implement and support of wireless LANs, specifically those networks using Cisco equipment. With a CCNA Wireless certification, network professionals can support a basic wireless network on a Cisco WLAN in a SMB to enterprise network. The CCNA Wireless curriculum includes information and practice activities to prepare them for configuring, monitoring and troubleshooting basic tasks of a Cisco WLAN in SMB and Enterprise networks.

 

Computek is one of the largest and first Cisco Training centers in egypt with 20 years of experience delivering Cisco training and cisco certifications in all Cisco technologies.

 

All Cisco Training in Computek are held in Cisco Laps designed and equipped with cisco routers and cisco switches by Certified Cisco Systems Instructor CCSI with over than 8 years’ experience in the technical and training field.

 

 

Exam

Course Name

Hours

640-722 IUWNE

Implementing Cisco Unified Wireless Networking Essentials (IUWNE)

40

 

Implementing Cisco Unified Wireless Networking Essentials (IUWNE) 2.0

 

Prerequisites

 

 Learners considered for this training will have completed ICND 1 / CCENT certification. This is a prerequisite.
 Learners considered for this training will have a basic knowledge of: - the Cisco lifecycle deployment - the SONA.
 It is also recommended that learners considered for this training would have a basic knowledge of: - Wireless standards (IEEE) - Wireless régulation environnent (FCC, ETSI, etc.) - Wireless certification organization (wifi alliance).
 Learners considered for this training will have demonstrated competencies (knowledge, skills and attitudes) equivalent to the following: - Basic computer literacy, including the use of general office software such as Microsoft Word and Microsoft Excel - Basic Windows navigation and keyboard literacy skills - Basic Internet usage skills - Basic e-mail usage skills.

 

Course Content

 

The Implementing Cisco Unified Wireless Networking Essentials is a 5 day ILT course, designed to help students prepare for the IUWNE certification, an associate level certification specializing in the wireless field.

 

Course Objectives

 

The goal of the course is to provide students with information and practice activities to prepare them to help design, install, configure, monitor and conduct basic troubleshooting tasks of a Cisco WLAN in Enterprise installations.

 

Course Outline

 

   Understand WLAN fundamentals

   Describe basics of spread spectrum technology

   Describe the impact of various wireless technologies

   Describe wireless regulatory bodies, standards and certifications

   Describe WLAN RF principles

   Describe networking technologies used in wireless

   Describe wireless topologies

   Describe 802.11 authentication and encryption methods

   Describe frame types Install a basic Cisco wireless LAN

 

Who Should Attend

 

   Channel Partner / Reseller

   Customer

   Employee

 

Back to top

 

need best quotation for a training course in egypt call

 

 

sat-guaranteed

We are committed to providing our customers with the

best service and products available

100% satisfaction guarantee

 

 

why students prefer computek as the best training center in egypt new

 

1.Computek Training Center has trained over 1,000,000 trainees in Egypt and over 100,000 trainees in Middle East and africa.

 

2.Our programs are designed to meet our clients' training necessities including budget and time limitation.

 

3.We will cooperate with you to bring out effective programs fitting your organization.

 

4.Computek Training Center provides customer-focus training in mutable deliverymethods offering top quality training and high qualified instructor to meet individual learning styles and organization profession training.

 

5.Computek instructors are selected from the best of training professional instructors in Egypt who awarded the trust worthy certified international companies, Computek instructors not only provide superior education but also reliable work experience in the field of giving courses

 

6.Trainees prefer Computek Training Center not only due to our high quality training but also for our reasonable and cost-effective price list.

 

7.Computek Classroom is designed with cutting edge facilities strong from hardware and software technologies to the most sophisticated educational aids.

 

8.The information desk with our friendly and professional customers support representative is highly qualified to answer any questions and also deliver your unique requirements.

 

9.Computek Training Center staff is available 7 days in week from 10:00 AM to 10:00 PM to deal with any inquiries and assist student with anything they need.

 

10.Computek Training Center is partner of world's technology leads such as Microsoft, Cisco, Compatia, EC Council ,Adobe , Autodesk, prometric and Pearson VUE.

 

 

 

 

 

need best quotation for a training course in egypt call

sat-guaranteed

We are committed to providing our customers with the

best service and products available

100% satisfaction guarantee

 

why students prefer computek as the best training center in egypt new

1.Computek Training Center has trained over 1,000,000 trainees in Egypt and over 100,000 trainees in Middle East and africa.

 

2.Our programs are designed to meet our clients' training necessities including budget and time limitation.

 

3.We will cooperate with you to bring out effective programs fitting your organization.

 

4.Computek Training Center provides customer-focus training in mutable deliverymethods offering top quality training and high qualified instructor to meet individual learning styles and organization profession training.

 

5.Computek instructors are selected from the best of training professional instructors in Egypt who awarded the trust worthy certified international companies, Computek instructors not only provide superior education but also reliable work experience in the field of giving courses

 

6.Trainees prefer Computek Training Center not only due to our high quality training but also for our reasonable and cost-effective price list.

 

7.Computek Classroom is designed with cutting edge facilities strong from hardware and software technologies to the most sophisticated educational aids.

 

8.The information desk with our friendly and professional customers support representative is highly qualified to answer any questions and also deliver your unique requirements.

 

9.Computek Training Center staff is available 7 days in week from 10:00 AM to 10:00 PM to deal with any inquiries and assist student with anything they need.

 

10.Computek Training Center is partner of world's technology leads such as Microsoft, Cisco, Compatia, EC Council ,Adobe , Autodesk, prometric and Pearson VUE.

 

 

All Rights Reseved © Computekeg.com